コンクリートミックスデザイナー
構造コンクリートのためのコンクリート混合の設計を計算して下さい。 標準の公称グレード(C10〜C40)を選択するか、セメント、砂、砂利、および水の重量および量を取得するカスタム設計比率を入力します.
Something went wrong
Concrete Volume & Grade
Material Mix Proportions
Total volume calculated:--
Dry Mix Volume equivalent:--
Concrete Mix Material Estimate
Project Bill of Quantities (BOQ) Supporting Schedule
Date Generated:
--
Required Quantity: --
Concrete Grade: --
Wastage Margin: --
Cement Bag Size: --
Material Schedule Summary
| Material Description | Required Quantity (Weight) | Volume (CFT / Liters) |
|---|---|---|
| Cement (Dry Mix) | -- | -- |
| Sand (Fine Aggregate) | -- | -- |
| Gravel (Coarse Aggregate) | -- | -- |
| Mixing Water | -- | Liters (approx.) |
Calculated Volume (Wet):
--
Equivalent Volume (Dry):
--
Estimation Method: Standard Shrinkage Factor (1.54) & Bulk Densities
Prepared By: Estimator / Project Engineer
Concrete Mix Calculation Formula & Grade Rules
Concrete reduces in volume by about 35% to 36% when mixed with water due to voids filling up. Therefore, we use a dry volume conversion factor of 1.54:
1. Nominal Ratios (C10 to C25):
� C10 (1:3:6): Sum = 10. Cement = V_dry/10, Sand = 3�V_dry/10, Gravel = 6�V_dry/10.
� C15 (1:2:4): Sum = 7. Cement = V_dry/7, Sand = 2�V_dry/7, Gravel = 4�V_dry/7.
� C20 (1:1.5:3): Sum = 5.5. Cement = V_dry/5.5, Sand = 1.5�V_dry/5.5, Gravel = 3�V_dry/5.5.
� C25 (1:1:2): Sum = 4. Cement = V_dry/4, Sand = V_dry/4, Gravel = 2�V_dry/4.
� Material densities used: Cement = 1440 kg/m�, Sand = 1600 kg/m�, Coarse Aggregate = 1500 kg/m�. Water-cement ratio = 0.50.
2. Design Mix Weights per m� (C30 to C40):
� C30: Cement = 380 kg, Sand = 680 kg, Gravel = 1200 kg, Water = 185 kg.
� C35: Cement = 410 kg, Sand = 640 kg, Gravel = 1210 kg, Water = 185 kg.
� C40: Cement = 440 kg, Sand = 600 kg, Gravel = 1220 kg, Water = 180 kg.
� Design mixes bypass dry shrinkage calculations because they are based directly on established batch-weight parameters for compaction.
How to use Concrete Mix Designer
- コンクリートグレード(C15、C20、C25、C30、C35、C40など)を選択し、カスタムミックス比を入力します.
- 立方メートルまたはリットルの合計ターゲットコンクリートの容積を入れて下さい.
- 重量(kg)および容積(リットル/袋)の詳しい物質的な故障を読んで下さい.
コンクリートミックスデザイナーとは?
Concreteの組合せの設計は指定強さおよび耐久性のコンクリートを作り出すために材料(セメント、良い総計/砂、粗い総計/砂および水)の選択し、比率のプロセスです。 標準グレードミックス(C20、C25、C30など)は、28日後にメガパスカル(MPa)の圧縮強度を指定します。
この計算機は標準の容積の収縮(1.54の乾燥した容積の要因に基づくわずかなおよび設計混合のために要求される材料の量を決定します)。 セメント、砂、集合体、水に重みやボリュームを出力し、バッチを正確に実行できるようにします。
FAQ
- C25やC30などのコンクリートグレードはどういう意味ですか?
- 文字「C」は圧縮強度を表しています。 数値は、28日後にコンクリートの立方体でテストされたとき、正方形のミリメートル(N/mm2またはMPa)あたりのニュートンの特性の圧縮強度を表します.
- コンクリートの乾燥量係数は何ですか?
- 水と混合すると、新鮮なコンクリートが収縮します。 湿ったコンクリートの1立方メートルを作り出すためには、乾燥した原料の1.54立方メートルについて必要とします。 乾燥量係数として知られています.
- 標準的な具体的な等級の比率は何ですか?
- 共通のわずかな比率(セメント:砂:砂:斜面)はあります:C15は1:2:4、C20です1:1.5:3、C25は1:1:2であり、C30は1:0.75:1.5です.
Related tools
Author
Engineer & Unit Conversion Specialist
Omar is a mechanical engineer by training and a unit-conversion enthusiast by passion. He has built calibration systems for aerospace and automotive manufacturers and knows firsthand how a single decimal error can cost millions in rework. His mission is to make every conversion instant, accurate, and accessible to everyone, whether they are a student, tradesperson, or practicing engineer, with no advanced degree required.
People also use
- Concrete Calculator🚧 Construction Calculators
Free online concrete calculator. Calculate cubic yards, cubic meters, and number of 60lb/80lb bags needed for slabs, footings, and columns.
- Moment Resistance Calculator🚧 Construction Calculators
Free online moment resistance calculator for reinforced concrete slabs. Calculate ultimate design moment resistance (Mu) using rebar size, spacing.
- Plaster Sand & Cement Calculator🚧 Construction Calculators
Plaster Sand & Cement Calculator — Calculate the quantities of cement and sand required for plastering works. Input the total plaster area, thickness, m...